北京11选5

  • 冲压件如何正确的定位传送材料
  • 本站编辑:杭州丰达通信器材有限公司发布日期:2018-05-31 15:20 浏览次数:
在进行冲压件生产的时候,我们在使用压力机或者冲模等工程设备的时候,要注意,我们要在正常的工作状态下进行使用,这样可以有效的防止条料不能沿着正确的定位传送材料,或者是不能按照我们提前预定好的一定间隙送料。
    我们保证冲模各处零件的一个紧固,注意,在进行冲压件生产的时候,不要将冲模的各个安装位置发生变化,一旦发生变化,就会擦伤或者压伤工件表面,这样对工件的质量影响程度是非常大的。
    我们在准备冲压件材料的时候,一定要遵守技术规范,注意对原材料尺寸进行准确的测量,一定要严格的进行原材料检查以及牌好的检查。还有就是,我们在进行冲压件生产的时候,一定要对磨具以及一些冲床尽心定期的检查,防止工作零件及导向零件因为长期运作而产生磨损。


In the production of stamping parts, we should pay attention to the use of press or die and other engineering equipment, we should use it in normal working condition, which can effectively prevent the material from transporting the material along the correct position, or it can not be delivered in a certain clearance according to our prearranged schedule. Material.
We guarantee the stamping die parts of each part of a fastener, attention, in the production of stamping parts, do not change the position of the stamping die, once the change, will scratch or crush the workpiece surface, so the quality of the workpiece is very large.
When we prepare the stamping materials, we must comply with the technical specifications, pay attention to the accurate measurement of the size of the raw materials, and must strictly carry out the inspection of the raw materials and the good cards. Also, when we are in the production of stamping parts, we must check the grinding tools and some punches at regular intervals to prevent the wear of the working parts and the guiding parts because of the long-term operation.

五分pk拾 pk10开奖记录 北京pk10冠亚军玩法 北京pk10稳赚 北京pk10稳赚 pk10玩法介绍 PK10注册 pk10玩法规则 金丰彩票聊天室 新世佳彩票注册